Optimisation of the pin cooler design for the megapie target using full 3D numerical simulations
| dc.contributor.author | Buono, Stefano | |
| dc.contributor.author | Maciocco, Luca | |
| dc.contributor.author | Moreau, Vincent | |
| dc.contributor.author | Sorrentino, Luca | |
| dc.date.accessioned | 2014-03-28T12:07:27Z | |
| dc.date.available | 2014-03-28T12:07:27Z | |
| dc.date.issued | 2002-01-18 | |
| dc.description.abstract | The MEGAwatt PIlot Experiment (MEGAPIE) project has been recently proposed to demonstrate the feasibility of a liquid lead bismuth target for spallation facilities at a beam power level of 1 MW. The target will be put into operation at the Paul Scherrer Institut (PSI, Switzerland) in 2004 and will be used in the existing target block of SINQ. About 650 kW of thermal power has to be removed through a bunch of 12 pin-coolers. In order to improve the heat exchange, it was decided to investigate the possibility of accelerating the oil coolant by introducing a spiral in the oil cylindrical channel. This forces the flow to rotate while rising, thus increasing the Reynolds number and the heat transfer coefficient. We show some numerical simulations, which have supported the dimensioning of the pins as well as the choice of the secondary coolant, that is Diphyl THT. The spiral option has been confirmed. The spiral diameter must be a little smaller than the channel width, to allow the effective mechanical assemblage of the pin. The existence of a gap between the spiral and the external wall adds complexity to the numerical simulation, being fully 3D with several orders of magnitude of length scales involved. A single pin has been tested by Enea-Brasimone and entirely simulated by CRS4 for a matrix of various operational settings. Results are shown and compare. | IT |
| dc.identifier.uri | http://hdl.handle.net/11050/739 | |
| dc.language.iso | en | IT |
| dc.subject | pin-cooler | IT |
| dc.subject | 3D simulation | IT |
| dc.subject | 2D simulation | IT |
| dc.subject | CFD | IT |
| dc.subject | Reynolds number | IT |
| dc.subject | flow rate | IT |
| dc.subject.een-cordis | EEN CORDIS::FISICA E SCIENZE ESATTE::Matematica, statistica::Modellazione matematica | IT |
| dc.subject.een-cordis | EEN CORDIS::FISICA E SCIENZE ESATTE::Fisica::Fisica dei fluidi | IT |
| dc.subject.een-cordis | EEN CORDIS::ELETTRONICA, INFORMATICA E TELECOMUNICAZIONI::Multimedia::Visualizzazione, realtà virtuale | IT |
| dc.title | Optimisation of the pin cooler design for the megapie target using full 3D numerical simulations | IT |
| dc.type | Report | IT |